Item Description

ZheJiang Xihu (West Lake) Dis. specializes in the R&D, manufacturing, income and following product sales support of compressors, which include oil-free of charge air compressors, oil-injected air compressor and air stop, unique gasoline compressors and put up-processing gear and many others, under the model title “Xihu (West Lake) Dis.r”, “OFAC” . 

Product Functions

*Productive long term magnet synchronous motor employing large-functionality NdFeb permanent magnet, 120ºC with no reduction of magnetic. Through the magnetic field and magnetic drive produced by the AC voltage connected to the stator coil, the rotor generates rotation, minimal pace and large effectiveness.

*Sophisticated level of integrated host design. Higher performance, reduced speed, minimal noise, reduced strength use, minimal routine maintenance value, dependable steadiness and usability. Undertake the embedded built-in shaft right connected construction, compact framework, substantial transmission performance.

*Massive ability oil and gasoline separator, coupled with innovative oil and gasoline separation elements and gasoline, liquid filtration components, with 3 times oil and gas separation, to ensure the good quality of compressed air.

*Ingestion valve plate adopts worldwide sophisticated technology, coupled with sensible sounds reduction layout, ingestion valve adjustment range -a hundred% effortless to change, modest stress reduction, prolonged existence.

*Substantial efficiency cooler adopts huge heat exchange area design, increase cooling effectiveness, successfully imitation equipment high temperature, anti-corrosion therapy of the internal wall, the use of a lot more significant mining, extend the provider lifestyle.

Technological Knowledge—-OIL INJECTED Collection
Model Power Stress (bar) Air Circulation (m3/min) Sounds Level dBA Outlet Pipe Diameter Dimension LxWxH (mm)
BO-7.5 7.5kw 10hp 7 one.2 66±2 G 1/2″ 800*seven-hundred*930
eight one.1
ten .95
12 1.8
BO-11 11kw 15hp seven one.sixty five 68±2 G 3/4″ 950*750*1250
8 one.5
ten one.three
12 one.1
BO-15 15kw 20hp seven two.five
eight 2.three
10 two.1
12 one.nine
BO-18.5D 18.5kw 25hp seven three.2 G 1″ 1380*850*1160
eight three.
twelve 2.four
BO-22D 22kw 30hp seven three.8
8 3.6
ten 3.two
BO-30D 30kw 40hp seven five.3
eight five.
10 four.five
12 4.
BO-37D 37kw 50hp seven 6.8 G 1-1/2″ 1500*one thousand*1330
eight six.2
ten five.six
12 5.
BO-45D 45kw 60hp seven 7.four 72±2
8 7.
10 6.2
twelve 5.6
BO-55D 55kw 75hp seven ten. G 2″ 1900*1250*1570
eight nine.six
10 eight.5
twelve 7.six
BO-75D 75kw 100hp 7 thirteen.4
8 twelve.6
10 11.two
12 10.
BO-90D 90kw 125hp seven 16.2
eight 15.
ten 13.8
12 12.3
BO-110D 110kw 150hp seven 21. G 2-1/2″ 2500*1470*1840
8 19.8
10 seventeen.four
twelve 14.eight
BO-132D 132kw 175hp seven 24.five 75±2
eight 23.2
ten 20.five
twelve 17.4
BO-160D 160kw 220hp 7
eight 27.six
ten 24.6
twelve 21.5
BO-185D 185kw 250hp 7 32. DN85 3150*1980*2150
8 thirty.four
10 27.four
twelve 24.eight
BO-220D 220kw 300hp 7 36. 82±2
8 34.3
ten thirty.2
BO-250D 250kw 350hp 7 forty two.
eight 40.5
ten 38.2
12 34.five
BO-315D 315kw 430hp 7 51.
eight 50.two
ten 44.5
12 39.5
BO-355D 355kw 480hp 7 sixty four. 84±2 DN100
eight sixty one
ten 56.5
twelve 49.
BO-400D 400kw 545hp 7 71.2
eight 68.1
ten 62.8
12 sixty two.2


Technical Data
Product Electrical power Stress (bar) Air Flow (m3/min) Sounds Degree dBA Outlet Dimension Weight (kgs) Lubricating Drinking water(L) Filter Component (B)-(Z) Dimension LxWxH (mm)
OF-7.5F 7.5kw 10hp eight one. 60 RP 3/four four hundred 22 (25cm) one one thousand*720*1050
OF-11F 11kw 15hp 8 1.6 63 460 1156*845*1250
OF-15F 15kw 20hp 8 2.five 65 RP 1 620 28 (50cm) 1 1306*945*1260
OF-18F eighteen.5kw 25hp eight 3. 67 750 33 1520*1060*1390
OF-22F 22kw 30hp eight 3.6 sixty eight 840 33 1520*1060*1390
OF-30F 30kw 40hp eight five. sixty nine RP 11/4 1050 66 (25cm) five 1760*1160*1490
OF-37F 37kw 50hp 8 six.2 71 1100 1760*1160*1490
OF-45S 45kw 60hp eight 7.3 seventy four RP 11/two 1050 88 1760*1160*1490
OF-45F 45kw 60hp 8 seven.three seventy four 1200 1760*1160*1490
OF-55S 55kw 75hp eight ten seventy four RP two 1250 110 (50cm) 5 1900*1250*1361
OF-55F 55kw 75hp 8 10 seventy four 2200 (50cm) seven 2350*1250*1880
OF-75S 75kw 100hp 8 thirteen 75 1650 (50cm) five 1900*1250*1361
OF-75F 75kw 100hp 8 13 75 2500 (50cm) seven 2550*1620*1880
OF-90S 90kw 125hp 8 15 76 2050 (50cm) 5 1900*1250*1361
OF-90F 90kw 125hp eight fifteen seventy six 2650 (50cm) 7 2550*1620*1880
OF-110S 110kw 150hp eight twenty 78 DN 65 2550 a hundred thirty (50cm) twelve 2200*1600*1735
OF-110F 110kw 150hp 8 20 78 3500 130 3000*1700*2250
OF-132S 132kw 175hp 8 23 eighty 2700 130 2200*1600*2250
OF-160S 160kw 220hp 8 26 eighty two 2900 one hundred sixty five 2200*1600*2250
OF-185S 185kw 250hp eight thirty 83 DN 100 3300 180 (50cm) 22 2860*1800*1945
OF-200S 200kw 270hp eight 33 eighty three 3500 2860*1800*1945
OF-220S 220kw 300hp eight 36 85 4500 2860*2000*2300
OF-250S 250kw 340hp eight forty eighty five 4700 2860*2000*2300
OF-315S 315kw 480hp 8 50 ninety 5000 2860*2000*2300

 F– air cooling method     S– water cooling technique



Q1: Warranty terms of your machine?
A1: Two 12 months guarantee for the machine and technical support according to your needs.

Q2: Will you provide some spare components of the equipment?
A2: Indeed, of training course.

Q3: What about item package deal?
A3: We pack our items strictly with normal seaworthy situation. Rcommend wooden box.

Q4: Can you use our model?
A4: Of course, OEM is available.

Q5: How long will you take to organize production?
A5: Quick shipping for inventory products. 380V 50HZ we can shipping the merchandise in 3-15 times. Other  voltage or other shade we will shipping and delivery inside of 30-45 times.

Q6: How Numerous Staff Are There In your Manufacturing unit?
A6: About 100.
Q7: What is actually your factory’s production potential?
A7: About 550-650 units per thirty day period.

Q8: What the exactly handle of your manufacturing facility?
A8: Our initial workshop found in HangZhou, ZheJiang , second workshop located in HangZhou, ZheJiang ,  China.


After-sales Service: Online Support
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Horizontal


A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with two pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the two types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last nine to eighteen months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for two to five diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.

Rotary vane compressors with two pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose one with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China 30A-60A-Iid High Efficiency 2stage Oil Injected VSD Screw Air Compressor     lowes air compressorChina 30A-60A-Iid High Efficiency 2stage Oil Injected VSD Screw Air Compressor     lowes air compressor
editor by CX 2023-04-12

Food compressor

As one of the food compressor manufacturers, suppliers, and exporters of mechanical products, We offer food compressors and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of food compressor.

Recent Posts